[Username Protected]

ICON has identified that some of the 4 AWG wire harness to terminal connections in the affected aircraft do not meet the required tensile pull force of 140lbs due to improper crimping of the wire harness to the terminal. Therefore, the crimp on certain connections needs to be visually inspected and re-crimped (or replaced) if found to be improperly crimped.

https://www.iconaircraft.com/wp-content/uploads/2022/09/SD-092122-A.pdf

DATE ISSUED: 09/22/2022
DATE EFFECTIVE: 09/22/2022
S/N: 135-136, 139-146, 148-150, 152-159
TIME OF COMPLIANCE: Complete inspection instructions before next flight