Results 1 to 6 of 6
  1. Username Protected
    Michel Gadbois's Avatar
    Star Contributor

    Posts
    336 Posts
    Thanked 65 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Sep 2022
    Location
    Kingston, TN
    Location
    2TN7
       #1  

    Rotax 912is MANDATORY 5yr. Rubber Replacement

    Hello Everyone,

    James will be coming up to TN to complete my 100hr/Annual on my Aircraft. My airframe was delivered to its first owner In January 2018. The engine was installed in the airframe on November 11 2017. James educated me on the fact that I will need to pull the engine and replace ALL rubber components on the engine including Engine Isolators. This requirement is NOT optional. It's about 5K in parts and 40hrs of labor. I may be one of the first to get this done so I will keep you all abreast of developments. More to follow.
  2. Username Protected
    Marcus Adolfsson's Avatar
    Really Frequent Poster

    Posts
    235 Posts
    Thanked 61 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Oct 2020
    Location
    St Petersburg, FL
    Location
    KPIE
    #2  
    Make sure they torque all the oil return lines to spec!
    St Petersburg, FL - N1BA #140 Icon G3x & N329MC Phenom 300
  3. Username Protected
    Michel Gadbois's Avatar
    Star Contributor

    Posts
    336 Posts
    Thanked 65 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Sep 2022
    Location
    Kingston, TN
    Location
    2TN7
       #3  
    That sounds like experience talking...
  4. Username Protected
    Marcus Adolfsson's Avatar
    Really Frequent Poster

    Posts
    235 Posts
    Thanked 61 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Oct 2020
    Location
    St Petersburg, FL
    Location
    KPIE
    #4  
    Quote Originally Posted by Michel Gadbois View Post
    That sounds like experience talking...
    Not personally, but this SB came out in 2018 after an oil return fitting on the engine was found loose (and dumped oil).

    https://www.iconaircraft.com/wp-cont...B-033018-B.pdf
    St Petersburg, FL - N1BA #140 Icon G3x & N329MC Phenom 300
  5. Username Protected
    Brett West's Avatar
    Member

    Posts
    64 Posts
    Thanked 22 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Dec 2021
    Location
    Lake George, NY
    Location
    KAPF & KGFL
    #5  
    Ahhh yes, that was Genesah's engine out. She told me about it in detail. She put it down in a cow pasture, gear up, if I recall. What was most shocking, and good info for us all, is that from the moment the oil light and indications showed to total engine out was less than a minute. If that oil light comes on, expect to be gliding very very soon.
  6. Username Protected
    Icon Expert

    Posts
    167 Posts
    Thanked 72 times
    Icon Enthusiast
    Join Date
    Joined Dec 2021
    Location
    Vacaville, CA
    Location
    KVCB
    #6  
    If I recall correctly from the first start of oil pressure loss to engine failure was about 4 min. Regardless it not long. To be honest though how long do you expect an engine to stay alive with no oil pressure while spinning at 5500 RPM. Personally I think 1 to 5 min is kinda impressive.

    What I don't like is that Rotax doesn't throw a Major Fault (land aircraft / Engine for icon owners) or even a Minor fault (engine light for ICON owners) for oil pressure but will throw a minor fault for coolant temperature. That was a real head scratcher for me at the time. Icon took it on itself to design a change to the DAC logic to throw these faults if this occurs but it wasn't easy. Regular Rotax users don't have this though.

Posting Permissions