Results 1 to 1 of 1
  1. Username Protected
    Marcus Adolfsson's Avatar
    Really Frequent Poster

    Posts
    233 Posts
    Thanked 61 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Oct 2020
    Location
    St Petersburg, FL
    Location
    KPIE
       #1  

    SB: Engine Wire Harness Installation (SB-011323-A)

    It was recently discovered that the Kevlar insulated, or spiral wrapped engine wire harness were not properly secured to the cable tie mounts near the intake plenum and throttle body. There is a specific installation that properly secures the wire harness to the engine, ensuring the wire harness remains wrapped during engine operations. Failure to have the insulated wire harness properly secured could lead to the Kevlar insulation or spiral wrap releasing from the wire harness, exposing the wire harness to engine heat and chaffing.

    https://www.iconaircraft.com/wp-cont...Protection.pdf

    DATE ISSUED: 01/19/2023
    DATE EFFECTIVE: 01/19/2023
    S/N: 00002 – 00136, 00139 – 00146, 00148 – 00150, 00152 – 00159, 00161, 00163, 00166, 00170
    TIME OF COMPLIANCE: At the next Service Interval
    St Petersburg, FL - N1BA #140 Icon G3x & N329MC Phenom 300

Posting Permissions